Pressure die casting (abbreviated as die casting) is essentially a method in which liquid or semi-liquid metal is injected at high velocity into a die cavity under high pressure, where it takes shape and solidifies while still under pressure to produce a casting.
Characteristics
High pressure and high-velocity filling of the die are the two defining characteristics of die casting. The specific injection pressure typically employed ranges from several thousand to tens of thousands of kPa, and can even reach as high as 2 × 10⁵ kPa. The filling velocity is approximately 10 to 50 m/s, and in some instances, it may even exceed 100 m/s. The filling time is extremely brief, generally falling within the range of 0.01 to 0.2 seconds. Compared to other casting methods, die casting offers advantages in the following three key areas:
1. High Product Quality
Die castings exhibit high dimensional accuracy, generally corresponding to grades 6–7 (and potentially reaching grade 4); they possess excellent surface finish, typically corresponding to grades 5–8; and they demonstrate superior strength and hardness-tensile strength is generally 25–30% higher than that of sand castings, though elongation is reduced by approximately 70%. Furthermore, the castings are dimensionally stable and highly interchangeable. Die casting enables the production of complex, thin-walled parts. For instance, the minimum wall thickness currently achievable for zinc alloy die castings is 0.3 mm, while for aluminum alloy castings, it is 0.5 mm; the minimum cast-in hole diameter is 0.7 mm, and the minimum thread pitch is 0.75 mm.
2. High Production Efficiency
Machine productivity is high; for example, a domestically manufactured Model JⅢ3 horizontal cold-chamber die casting machine can perform an average of 600 to 700 casting cycles per eight-hour shift, while a small hot-chamber die casting machine can average 3,000 to 7,000 cycles per eight-hour shift. Die molds (dies) possess a long service life; a single set of dies used for casting zinc alloys can last for hundreds of thousands-or even millions-of cycles. Moreover, the process is highly amenable to mechanization and automation.
3. Excellent Economic Benefits
Due to advantages such as precise dimensions and excellent surface finish, die castings can often be used directly without further machining, or require only minimal post-processing. This not only improves metal utilization efficiency but also significantly reduces the need for machining equipment and labor hours. Consequently, the cost per casting is relatively low. Additionally, composite die casting techniques can be employed to integrate other metallic or non-metallic materials into the casting, thereby saving both assembly time and metal material.